Fireplaces are quite significant pieces of equipment in any residence and business building, especially if the area usually experiences adverse winter climate. One of the uses of fireplaces is to warm up buildings and keep the people inside cozy. This makes homes more habitable. Fireplaces also come in handy in places where overnight temperatures can drop too low. When one needs Gas Fireplaces Dallas offers the perfect location to visit.
There is a wide range of these devices in the market nowadays. There are different models to pick from made by different manufacturers. Different kinds of fuel are used to power different models. Wood or coal is burnt in some products while in others, gas or electricity is used. Gas and electric products require minimum maintenance and are more convenient. However, they are more costly to buy and use.
Wood-burning fireplaces are very cheap and given that wood are easily available and cheap, they are very easy to maintain. Today, these products have been incorporated with very many features that make them safer and more effective, convenient, and easier to use. The choice of wood that one uses usually determines performance and the general lifespan of the product. The type of wood used in the product also determines service requirements and maintenance.
Gas has become very cheap today. It is usually delivered to homes in large tanks that are installed outdoors. The service company will regularly check the tank and provide any maintenance service required. In case the gas runs out, the company refill it. Large tanks can take several months or even years before they empty depending on how much one uses the gas.
When one buys or uses a fire place, pollution is a major issue that should be paid attention to. Strict regulations have been set by the Environmental Protection Agency (EPA) against the use of wood burning fireplaces that poison the environment. Burning wood produces harmful particles, gases and smoke. Between 70 and 80 grams of particles and gases were emitted every hour by hearths before restrictions were made.
Manufacturers have improved designs of hearths a lot since regulation was passed. Currently, the amount of particle contamination has greatly dropped to 4.5 grams per hour in fireplaces that do not use catalysts. Catalytic fireplaces only produce 3 grams of particles per hour. These discharge levels are within EPA stipulations.
The drop in pollution was enabled by the integration of a re-burn system in modern products. These systems are meant to decrease particle pollution. Re-burn systems come in two varieties, that is, the catalytic and non-catalytic systems. Catalytic systems have a combustor which allows smoke to run through when the damper is closed. The high level of temperature in the combustor incinerates all particles in the smoke produced.
The burning of smoke in the combustor results in the emission of much cleaner smoke. Combustor need to be cleaned yearly in order to keep them properly functional. Non-catalytic fireplaces on the other hand use secondary air tubes. In these models, smoke is combined with hot air to burn all by-products.
There is a wide range of these devices in the market nowadays. There are different models to pick from made by different manufacturers. Different kinds of fuel are used to power different models. Wood or coal is burnt in some products while in others, gas or electricity is used. Gas and electric products require minimum maintenance and are more convenient. However, they are more costly to buy and use.
Wood-burning fireplaces are very cheap and given that wood are easily available and cheap, they are very easy to maintain. Today, these products have been incorporated with very many features that make them safer and more effective, convenient, and easier to use. The choice of wood that one uses usually determines performance and the general lifespan of the product. The type of wood used in the product also determines service requirements and maintenance.
Gas has become very cheap today. It is usually delivered to homes in large tanks that are installed outdoors. The service company will regularly check the tank and provide any maintenance service required. In case the gas runs out, the company refill it. Large tanks can take several months or even years before they empty depending on how much one uses the gas.
When one buys or uses a fire place, pollution is a major issue that should be paid attention to. Strict regulations have been set by the Environmental Protection Agency (EPA) against the use of wood burning fireplaces that poison the environment. Burning wood produces harmful particles, gases and smoke. Between 70 and 80 grams of particles and gases were emitted every hour by hearths before restrictions were made.
Manufacturers have improved designs of hearths a lot since regulation was passed. Currently, the amount of particle contamination has greatly dropped to 4.5 grams per hour in fireplaces that do not use catalysts. Catalytic fireplaces only produce 3 grams of particles per hour. These discharge levels are within EPA stipulations.
The drop in pollution was enabled by the integration of a re-burn system in modern products. These systems are meant to decrease particle pollution. Re-burn systems come in two varieties, that is, the catalytic and non-catalytic systems. Catalytic systems have a combustor which allows smoke to run through when the damper is closed. The high level of temperature in the combustor incinerates all particles in the smoke produced.
The burning of smoke in the combustor results in the emission of much cleaner smoke. Combustor need to be cleaned yearly in order to keep them properly functional. Non-catalytic fireplaces on the other hand use secondary air tubes. In these models, smoke is combined with hot air to burn all by-products.
About the Author:
Get a summary of the factors to consider before picking an installer of gas fireplaces Dallas area and more information about an experienced installer at http://www.northtexaschimney.com/index.html now.
No comments:
Post a Comment