Friday, October 23, 2015

The Marietta Fix Leaking Roofing Process

By Andrew B. Spates


In the modern world, there are many causes of shingle damage, from low quality shingles to corrosion from acidic rain. This makes it hard for home owners to locate a leak, since its original point may be far away from where drop of water are coming from. One can always hire Marietta Fix Leaking Roofing to perform this task for them. However, upon locating the source of the leak, one can easily repair the damaged shingle.

The process of fixing a roof starts with location of the leak. You may start with looking out for any penetration which could be on the roof. You may do this using light or water. Most leakages are usually located at the rooftops or near chimneys. At such points, contractors are aware that they are likely to find a weak point which could lead to leakages.

In case a ceiling has been installed, then it even gets easier to locate the leakage point. This is because, when there is a leak, it causes part of the ceiling to darken. In other cases, mold growth may indicate the leakage. You can take advantage of sunlight to check for the weak points.

There are water testing methods used to located penetrating drips in the first place. Contractors advocate for this method thought it should be done during dry and calm weather. Conduct this test with the help of a family member. Pour out water on the shingles and with the help of the other person locate the penetration. Do this with the help of a flash light.

Most water leakages are as a result of holes on the roof. Most of the problems can be fixed by a home owner since no much trouble is involved. In most fixing procedures, a galvanized shingle is appropriate for use. Other tools such as a nail gun can be used. These tools are readily available in hardware stores.

Proceed to lifting the affected shingle. Upon removing it, push the new shingle under it so as to cover the affected area. Nail the shingle ensuring that it flashes out and above the leak in order to drain water far way. The shed area should be over the affected shingle. Flashing the metallic shingle also helps in keeping off ice dams that normally rest on colder parts of the dome.

For complex water penetrations, remember to engage a qualified contractor. Contractors have experience and techniques to handle complex dome problems. Remember that at the end, a new roof installation may be required, if the cost of repair of the old one exceeds cost of installing a new one. Always conduct repairs in the best weather possible.




About the Author:



No comments:

Post a Comment