Tuesday, September 22, 2015

Homeowners Get Good Advice From Smyrna GAF Master Elite Roofers

By Andrew B. Spates


For excellent looking and long-lasting roofing applications, a reputable company is the optimal choice. Rather than push his ideas on to the homeowner, he will present the types of roofing materials that are available and make suggestions. The roofers must be familiar with materials on the final layer as well as the substrate which supports the shingles or other finishing materials. The Smyrna GAF Master Elite Roofers have verifiable credentials to offer.

Ask the roofer if he will come to your home and provide an estimate. Ask to see colors and styles of shingles that are available. You will want to know which are more affordable and which last the longest number of years.

He should be able to take measurements and give you a bid on the price. You also will want to verify his license is current. If possible, ask to see the homes he has installed new roofs on in the area and if the homeowners are satisfied.

An average homeowner is not familiar with all types of roofs and the materials used. For example, rubber roofing application adheres to the insulation. The stone ballast system has a layer of stone distributed evenly on top of the building.

The metal retrofit roof is relatively unknown to the average person. But, shingle roofs are common. A wide variety of material is used to make the shingles, including cedar, tile and slate. When hiring a professional roofer, the application can stand up against all weather conditions for many years.

The generic name for roofing material is "shingle". A wooden shingle such as red cedar can last for up to thirty years. Wood shingles should have room to dry out from below the surface.

The longest lasting roof is one made of slate. It may last as long as four-hundred years. It is very expensive, however, none other is as durable. For a low-cost shingle there is one made of asphalt. It is easy to apply.

Metal shingles also have a long life expectancy. They are high in cost and used mostly on roofs with a steep pitch. Assembly time is relatively fast.

In most locations the roofing construction company is not allowed to install a third layer of shingles. One layer is better than two layers, yet a second layer is an accepted practice. This saves money because the old roof does not have to be torn off. Three layers, however, would not give a good appearance or a durable one.




About the Author:



No comments:

Post a Comment